Smooth side or sheet and post: which dump trailer should you choose?

Short answer: between smooth side or sheet and post, a smooth side dump trailer gives about 4 in. more inside width (97⅞ in. on a Cobra). On a 45 ft Cobra dump trailer with 72 in. walls, that is about 80 cubic yards instead of 77. Sheet and post is about 200 kg (440 lb) lighter.
| Criteria | Smooth side (panels) | Sheet and post |
|---|---|---|
| Inside width | ≈ 98 in. (97⅞ in. on the Cobra) | ≈ 94 in. |
| Volume, 45 ft × 72 in. walls | ≈ 80 yd³ | ≈ 77 yd³ |
| Weight | About 200 kg (440 lb) more | The lighter one |
| Wall heights | 60 to 84 in. | 60, 72, 76, 78, 84 or 90 in. |
| Build | Hollow panel: separate inner and outer skins | One aluminum sheet, inside and out |
| Rock hitting the inside | Outside often stays intact | Dent shows on the outside |
| Repairing an outside dent | Similar cost | Similar cost |
| Washing | Easier, uniform surface | Harder |
| Teflon liner | Available | Available |
| Cobra models | 434B (4 axles), 433B (3 axles), 433H hybrid | 453T (3 axles) and a 4-axle version |
What is the difference between smooth side and sheet and post?
A smooth side wall is built from hollow extruded aluminum panels. Each panel has an inner and an outer skin, joined by internal ribs.
A sheet and post wall is a single aluminum sheet, reinforced by vertical posts. The same sheet forms the inside and the outside of the trailer.

Both are built to a 102 in. overall width, the legal limit. The difference is on the inside.
See photos of the Cobra smooth wall box and pole wall box.
How much room does a smooth side give you?
A smooth side gives about 4 in. more inside width. On the Cobra, it is 97⅞ in. for a 102 in. overall width, according to the manufacturer's spec sheet.

On a 45 ft trailer with 72 in. walls, our calculation gives about 80 cubic yards for smooth side and 77 for sheet and post. We measure level with the top of the walls: width × height × inside length, divided by 27. We keep the numbers conservative, because the hoist housing and the front floor slope take up some room.
Three more cubic yards a load adds up over a hauling season.
Which one is heavier?
Smooth side is about 200 kg (440 lb) heavier. That is sheet and post's main technical advantage: 200 kg less trailer means 200 kg more payload within the weight limit.
Wall height matters too. On a 45 ft smooth side trailer, going from 72 to 78 in. walls adds about 185 lb.
For reference, a 4-axle aluminum Cobra weighs about 8,800 kg (≈ 19,400 lb), depending on options.
Which one resists dents better?
Smooth side protects the trailer's looks better. When a large rock hits the inner skin, the outer skin can stay intact, so the damage does not show from outside.

With sheet and post, the same sheet is the inside and the outside. A rock that dents the inside leaves a dent you can see from outside.
Repairing an outside dent costs about the same on both wall types.
Which one unloads and cleans better?
Both unload very well with sand, stone, grain, salt and black earth. A Teflon liner can be installed in either type to unload faster and more easily.
For washing, smooth side has the edge: its uniform outer surface is easier to wash and keep clean.
Smooth side or sheet and post: which fits your work?
- 3/8 in. stone, sand, salt, black earth: both work very well.
- 2 in. stone: smooth side. With sheet and post, rock impacts can leave dents visible from outside.
- Demolition: a reinforced smooth side, with an extra aluminum sheet on the inside.
- Grain, wood chips, compost: smooth side, for its width and volume.
- Every kilo counts: sheet and post, about 200 kg lighter.
- Liquid materials: the Cobra 453T sheet and post can be built watertight.
- Asphalt: neither, in 3 or 4 axles. These trailers stand very high when dumping and are hard to move on roads under construction. Choose a shorter 2-axle trailer, ideally with steel walls, such as Cross Country.
The number of axles matters as much as the wall. See our 3 and 4 axle trailers.
Sylvain Labelle's pick (president): "Both wall types are good options. Sheet and post mainly offers a weight advantage and a traditional look. I recommend smooth side for its versatility, its volume and its easy upkeep." His reasons:
- Fewer dents visible from outside.
- Better-sealed lights.
- Stronger rear: reinforcement at the bottom of the tailgate, and no post needed at the upper rear.
- Better aerodynamics, thanks to a more uniform outer surface.
- About 4 in. more width and 3 more cubic yards.
- Easier to wash, with a cleaner finish.

Smooth side and sheet and post trailers at Remorques Labelle
Remorques Labelle is the exclusive Cobra dealer in Quebec. Cobra trailers are built in Laurier-Station, Quebec, in 6061-T6 aluminum, in lengths from 28 to 45 ft:
- 434B: 4 axles, 45 ft, smooth side, aluminum frame.
- 433B: 3 axles, 37 ft, smooth side, aluminum frame.
- 433H: 3-axle hybrid, 37 ft, smooth side on a T-1 steel frame.
- 453T: 3 axles, 40 ft, sheet and post, steel frame (galvanized available). Sheet and post is also available in 4 axles.
We are also a Titan dealer. The 45 ft 4-axle Titan has panels that are smooth inside, on an aluminum I-beam frame. For steel, we offer Cross Country trailers, built in Morden, Manitoba.
Wall height, frame, tarp, Teflon liner and rear gate are chosen when you order.
See all the Cobra features and our new Cobra dump trailers in inventory.
Frequently asked questions
1. What is a smooth side dump trailer? A dump trailer with walls made of hollow extruded aluminum panels, smooth inside and out.
2. What is a sheet and post dump trailer? A dump trailer built from a single aluminum sheet reinforced by vertical posts.
3. What is the inside width of a smooth side dump trailer? About 98 in. (97⅞ in. on a Cobra), for a 102 in. overall width. That is about 4 in. more than sheet and post.
4. How many cubic yards in a 45 ft dump trailer? About 80 cubic yards with 72 in. smooth side walls, and about 87 with 78 in. walls. In sheet and post, the same trailer holds about 77 cubic yards at 72 in.
5. Is a smooth side dump trailer heavier? Yes, by about 200 kg (440 lb). That is sheet and post's main advantage.
6. Which wall is best for asphalt? Neither, in 3 or 4 axles: these trailers stand too high when dumping and move poorly on job sites. A shorter 2-axle trailer with steel walls is a better fit.
7. Which wall is best for rock and demolition? Smooth side. For 2 in. stone, it avoids dents visible from outside; for demolition, it is reinforced with an extra aluminum sheet on the inside.
8. Can a smooth side panel be repaired? Yes. An outside dent costs about the same to repair on smooth side as on sheet and post.
9. What wall height should I choose? It depends on how dense your load is. Smooth side walls can be ordered from 60 to 84 in., and sheet and post walls up to 90 in.; the lighter the material, the more a tall wall helps.
10. How much weight do 6 inches of wall add? About 185 lb on a 45 ft smooth side trailer, going from 72 to 78 in.
11. Does Cobra make a sheet and post trailer? Yes, in 3 and 4 axles. The 3-axle model is the Cobra 453T, a 40 ft trailer on a steel frame.
12. Does a smooth side trailer cost more? The price depends mostly on options: frame, wall height, tarp, Teflon liner, rear gate. Call us at 450 688-3555 for a quote.
13. Can I get a smooth side on a steel frame? Yes. The Cobra 433H hybrid has a smooth side aluminum box on a T-1 steel frame.
14. What is a hybrid dump trailer? At Cobra, it is an aluminum box on a steel frame. The word does not mean the same thing at every brand.
15. Can I put a Teflon liner in a sheet and post trailer? Yes. A Teflon liner fits both wall types and speeds up unloading.
16. Can I get a watertight dump trailer? Yes. The Cobra 453T sheet and post can be built watertight for liquid materials.
17. Where can I buy a smooth side dump trailer in Quebec? At Remorques Labelle in Laval, the exclusive Cobra dealer in Quebec and a Titan dealer. See our inventory or call 450 688-3555.
Talk to our team
Still deciding between smooth side and sheet and post? Visit us at 1400 rue de Jaffa, Laval, or call 450 688-3555. See our Cobra dump trailers in inventory and the Cobra brand page.
Published November 20, 2026 · Written with Sylvain Labelle, president.
